| The Proteco
Shark underground kit is our premier product
offering the most visually and aurally discreet
gate automation system. This kit is one of
our most popular and is recommended for new
and existing swing gates, up to 3 metres each,
hung on posts or pillars. May be fitted to
gates that open outwards. Opening angles up
to 180° (angles between 90° - 180°
requires optional adaptor) may be achieved
dependent on gate hinge position. The operators
are non-reversible and therefore don’t
need the inconvenience or expense of an additional
electric lock to keep them closed.
If you don't want unsightly above ground
stops, then you could purchase the optional
Opening Limit Stops & Closing Limit
Stops which fit into the underground motor
chambers to restricted the movement at the
limits of travel.
The motor mechanics are buried within secure
steel (choose from galvanised or stainless)
underground foundation boxes so as not to
compete with the aesthetics of your gates;
all that can be seen is the steel lid covering
the operator box and a very small unobtrusive
operator attached to the bottom edge of
the gate leaf. As the motors are contained
underground, environmental noise intrusion
is minimal.
Designed for an intensive use by using
a die-casting structure made of quality
aluminium, stainless steel, bronze and steel.
The fluid-grease lubrication system and
the built-in thermal protection ensures
a long-lasting working life in any weather
conditions without the need for periodic
maintenance.
|
